Locating Tips / Range Guidelines - Loc8tor Tabcat Mode D'emploi

LOCATING TIPS
• Place the Tag on a surface and practice locating it a few times to get a feel for how it works.
• If you are ever unsure of which direction to go in, slowly repeat a full 360° circle and then go in the direction
with the strongest signal strength.
• Strongest signal is displayed when the Tabcat is pointing directly at the Tag. Try pointing the Handset up and
down as the Tag/your cat could be upstairs or downstairs, up a tree or hiding under a bush.
• If you are close to a wall whilst getting a strong signal check the room next door.
• Try switching the volume off on the Handset when you are close, in order to mute and listen out for the beeps
on the Tag.
• If no signal is displayed try moving position to a different area and repeat the process. (See page 6 for tips.)
• Try training your cat to come home.
The Locate button on your Handset activates a small beep on the tag. Activate a search just before meal times
until your cat or kitten associates the beeps on the tag attached to their collar with food. Use this signal to train
your cat to come home on demand.
For more tips on finding your cat or how to get the most from your Tabcat visit us at www.mytabcat.com/FAQs
RANGE GUIDELINES
Range will vary greatly depending on where the Tag is used and what it's attached to. If higher up and with a clear
line of sight (such as a cat in a tree), items can be found in excess of 122m/400feet. If locating through doors and
walls range will be significantly less.
Actual range may differ significantly as performance is affected by type of application and environment it's used in.
If no signal is picked up and displayed just walk whilst locating. As soon as you're in range Tabcat will pick up the
signal and guide you in.
8
www.mytabcat.com/FAQs