Evermount EM-SBBU Mode D'emploi page 3

All manuals and user guides at all-guides.com
Configuration 2: Installing Soundbar Brackets to a wall mounted flat panel
NOTE: This product is designed to be sandwiched in between the back of the flat panel and the
other wall mount as shown in Fig. 4. Since this will require using the wall mount
hardware, Bolt Bag A will not be required.
Step 1: Insert the Soundbar Brackets in between the back of your flat panel and your wall mount, as
shown in Fig. 4. Only secure with one bolt in each bracket as
demonstrated in the diagram.
Step 2: Re-install your flat panel wall mount into the back of
your flat panel using it's own hardware.
Step 3: There are three ways to mount your soundbar to the
Soundbar Brackets, depending on the mounting
specifications of your soundbar:
NOTE: Due to the lack of industry standard in mounting
patterns on soundbars, the provided hardware in Bolt Bag B
may not suit your specific model. Additional soundbar
hardware may be required.
A) If your soundbar has tear drop or keyhole mounting holes
Use all the parts from Bolt Bag B and attach the bolts as
shown in Fig. 2. Hang your soundbar on the bolts, making
sure the bolt head fits properly in the holes. Make desired
alignment adjustments and tighten all bolts. Do not over
tighten.
B) If your soundbar is already fixed to a soundbar wall mount
Using hardware from Bolt Bag B, attach your soundbar's wall
mount bracket to the Soundbar Brackets as shown in Fig.3.
C) If the back of your soundbar has threaded mounting holes
Using hardware from Bolt Bag B, screw your soundbar
directly into the brackets. Make desired alignment
adjustments and tighten all bolts. Do not over tighten.
Step 4: Hang your flat panel back on your wall mount.
Maintenance
It is recommended that you check the brackets once a month
to ensure all connections are secure.
Re-tighten screws when necessary.
Fig. 4
3 SBBU.SB.102011.IM