Evermount EM-SBBU Mode D'emploi page 2

Configuration 1: Installing Soundbar Brackets to a flat panel on a pedestal
Step 1: Select the two bolts and two washers from Bolt Bag A that best fit the mounting hole pattern
on the back of your flat panel.
Step 2: See Fig. 1 for examples of multiple configurations you can use to adapt the bracket to
match your flat panel and soundbar requirements. Use the configuration that works best with your equipment.
NOTE: Only secure Soundbar Brackets with one bolt in each bracket as shown in diagrams. Additional washers
may be used as spacers if needed.
Fig. 1
B) If your soundbar is already fixed to a soundbar wall mount
Using hardware from Bolt Bag B, attach your soundbar's wall mount
bracket to the Soundbar Brackets as shown in Fig.3.
C) If the back of your soundbar has threaded mounting holes
Using hardware from Bolt Bag B, screw your soundbar directly into
the brackets. Make desired alignment adjustments and tighten all
bolts. Do not over tighten.
2
All manuals and user guides at all-guides.com
Step 3: There are three ways to mount your soundbar to the
Fig. 2
Soundbar Brackets, depending on the mounting specifications of
your soundbar:
NOTE: Due to the lack of industry standard in mounting patterns
on soundbars, the provided hardware in Bolt Bag B may not suit
your specific model. Additional soundbar hardware may be
required.
A) If your soundbar has tear drop or keyhole mounting holes
Use all the parts from Bolt Bag B and attach the bolts as shown in
Fig. 2. Hang your soundbar on the bolts, making sure the bolt
head fits properly in the holes. Make desired alignment
adjustments and tighten all bolts. Do not over tighten.
Fig. 3
SBBU.SB.102011.IM