Télécharger Imprimer la page

Miele Triflex HX2 Mode D'emploi page 43

Masquer les pouces Voir aussi pour Triflex HX2:

Publicité

Les langues disponibles

Les langues disponibles

To reduce the risk of electric shock, this appliance has a
polarized plug (one blade is wider than the other.) This plug
will fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install the proper
outlet. Do not alter the plug in any way.
Technical safety
The vacuum cleaner operates at 25.2 V.
It is classified as a class II
a class III appliance in its construction.
This appliance is supplied by a safety extra-low voltage
(SELV) power source where the voltage is low enough to
protect users from the risk of electrical shock. A Class II
charger is used for supplying power to charge the vacuum
cleaner.
Compare the connection data on the data plate of the
charger (voltage and frequency) with that of the electricity
supply. This data must match exactly. Without
modifications, the charger is suitable for 50 Hz and 60 Hz.
The electrical outlet must be fitted with a 16 A or 10 A
slow-blow fuse.
Check both the vacuum cleaner and all accessories
supplied with it for any visible signs of damage before use.
Do not use a damaged vacuum cleaner.
en-CA - Warning and Safety instructions
appliance and is designed as
43

Publicité

loading

Ce manuel est également adapté pour:

Triflex hx2 flashTriflex hx2 pro