HEINE EN50 Mode D'emploi page 11

General Notes
All manuals and user guides at all-guides.com
Check the correct operation of the product at regular intervals. Do not use the equipment if it shows visible
signs of damage.
This product is a precise device. Please handle this product with care and store it in a clean place.
This product is not allowed to be entered or used in strong magnetic fields like MRI scanners.
We can only guarantee the performance of this instrument when fitted and used with original
HEINE accessories and spare parts. Otherwise the HEINE Warranty is terminated.
Follow the instructions supplied with the unit regarding installation of the instrument support and the
wall-mounting bracket.
For wall-mounting, be sure to use the instrument support (2) supplied with the unit to be sure that the
instrument headband is located safely.
Make sure that the local mains voltage is the same as that shown on the identification plate of the plug-in
transformer.
In order to ensure correct operation, always connect the angled adaptor first to the connecting or extension
cord and only then to the power source.
Use only the appropriate HEINE mPack plug-in transformer to connect the unit to the local mains supply.
If not used for long periods, unplug the mains transformer from the mains.
When moving from a cold to a warm environment, leave the power source switched off for up to one hour
to allow it to adapt to the new conditions.
The device must not be installed or stored outdoors to prevent operational failures.
Safety Information
The medical electrical equipment may only be used by medical professionals.
Do not expose the Li-ion mPack battery to ambient temperatures above +45°C.
All repairs should be carried out by qualified personnel, with the exception of a battery change with mPack.
When changing the battery, use only the original rechargeable battery HEINE
Do not use the device in rooms where an explosion hazard is present.
Electromagnetic Compatibility
Medical electric devices are subject to special precautionary measures with regard to electromagnetic compati-
bility (EMC). Portable and mobile high frequency communication equipment can affect medical electric devices.
This device is intended for use by medical professionals in the electromagnetic environment specified below.
The user of this device should assure that it is used in such an environment.
The use of accessories, converters or cables other than the ones specified by HEINE might lead to
increased emission reduced electrical immunity of the medical equipment.
The ME device may not be stacked directly near or used directly beside other devices. If the ME device is to
be operated in a stack or with other devices, the device should be watched to ensure it operates properly in
this location.
The appendix contains the tables „Guidance and Manufacturer's declaration –
Electromagnetic immunity" , technical data and an explanation of the used symbols.
med 1814 2014-08-13
Li-ion mPack.
®
11/52