Box Contents; Product Use; Starting The Hedge Trimmer - Greencut GHT560L Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

BOX CONTENTS

-
Hedge trimmer
-
Cover
-
Instruction manual
Remove the product and accessories from the box. Make sure all items are present.
Inspect the product to ensure that it has not been broken or damaged in transit.
Do not discard the packaging material until you have carefully inspected and satisfactorily used the product.
ATTENTION: If any part is missing or damaged, contact the Official Technical Service. Do not use
this product without having replaced the missing or damaged part. Using this product with
damaged or missing parts can cause serious injury to the operator.

PRODUCT USE

INSTALLING AND REMOVING BATTERY PACK
Place the battery in the hedge trimmer by sliding it through the corresponding opening. Make sure the battery is
properly installed in the hedge trimmer before operating it.
ATTENTION: To avoid serious personal injury, when inserting or removing the battery, keep your
hands away from the power button.
To remove the battery from the hedge trimmer, pull the battery latch downwards and remove it.

STARTING THE HEDGE TRIMMER

First, remove the blade cover. Then, press the trigger and the front handle switch. When operating, hold the hedge
trimmer with both hands, one hand to squeeze the trigger and the other hand to press the front handle.
2
1
1
41
1
2
EN

Publicité

Table des Matières
loading

Table des Matières