GreenWorks CRD401 Manuel De L'utilisateur page 11

11.1 CLEAN THE MACHINE
CAUTION
The machine must be dry. Humidity can cause risks of
electrical shocks.
• Clear the unwanted material out of the air vent with
a vacuum cleaner.
• Do not spray the air vent or put the air vent in
solvents.
• Clean the housing and the plastic components with
a moist and soft cloth.
12 TECHNICAL DATA
Voltage
Motor
No Load Speed
Blade diameter
Max cutting Depth at 0º
Max cutting Depth at 45º
Weight without battery
Battery model
Charger model
The recommended ambient temperature range:
Item
Appliance storage temper-
ature range
Appliance operation tem-
perature range
Battery charging tempera-
ture range
Charger operation temper-
ature range
Battery storage tempera-
ture range
Battery discharging tem-
perature range
English
24 V
Brushless
4,500 RPM
7.25 '' (184 mm)
2.48 '' (63 mm)
1.69 '' (43 mm)
7.39 lbs (3.35 kg)
LB24A040/BAG709 and
other BAG series
2978602/ 2903102 and
other CAG series
Temperature
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
39°F (4°C) - 104°F (40°C)
39°F (4°C) - 104°F (40°C)
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
13 LIMITED WARRANTY
LIMITED WARRANTY
GARANTIE LIMITÉE
Greenworks hereby warranties this product, to the
original purchaser with proof of purchase, for a period
of three (3) years against defects in materials, parts
or workmanship. Greenworks, at its own discretion, will
repair or replace any and all parts found to be defective,
through normal use, free of charge to the customer.
This warranty is valid only for units which have been
used for personal use that have not been purchased
or rented for industrial/commercial use, and that have
been maintained in accordance with the instructions
in the owners' manual supplied with the product when
new.
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to
misuse, commercial use, abuse, neglect, accident,
improper maintenance, or alteration; or
2. The unit, if it has not been operated and/or
maintained in accordance with the owner's manual;
or
3. Normal wear;
4. Routine maintenance items such as lubricants,
blade sharpening;
5. Normal deterioration of the exterior finish due to use
or exposure.
HELPLINE:
Warranty service is available by calling our toll-free
helpline at 1-888-909-6757.
TRANSPORTATION CHARGES:
Transportation charges for the movement of any power
equipment unit or attachment are the responsibility of
the purchaser. It is the purchaser's responsibility to
pay transportation charges for any part submitted for
replacement under this warranty unless such return is
requested in writing by Greenworks.
USA address:
Greenworks Tools
P.O. Box 1238, Mooresville, NC 28115
Canadian address:
Greenworks Tools Canada, Inc.
11
3
YEAR
ANS
AÑOS
GARANTÍA
LIMITADA
EN