Zodiac CNX 4020 iQ Manuel D'installation Et D'utilisation page 18

❹ Maintenance
To maintain the longest possible life of the robotic cleaner, we recommend to check all the
parts of the cleaner described in chapter 4. Maintenance at least once a month.
To avoid serious injury:
• Disconnect the cleaner from the power supply.
4.1 I Cleaning the cleaner
• The appliance must be cleaned regularly using clean or slightly soapy water. Do not use solvents.
• Rinse the appliance thoroughly with clean water.
• Do not let your appliance dry in the sun by the pool.
Tip: To preserve the integrity of the cleaner and guarantee optimum performance:
- The filter and brushes should be replaced every 2 years,
- Examine the wear indicator on the tracks and replace the tracks as soon as the indicator is reached.
4.2 I Cleaning the filter
• The cleaner's performance may be reduced if the filter is full or dirty.
• Clean the filter with clean water after each cleaning cycle.
• If the filter is blocked, clean it with an acid solution (spirit vinegar, for example). It is recommended that you do this at
least once a year, since the filter will clog if not used for several months (winterising period).
With dual filtration
With single filtration
EN
17