Eton SOLARLINK FR360 Mode D'emploi page 7

All manuals and user guides at all-guides.com
THE NOAA ALERT FEATURE
After you have tuned in your local Weather channel, the radio
can be set to the ALERT function, by pressing the ALERT button
(far right above the LCD). This function turns off the radio, but
continues to monitor the NOAA frequency. If an alert is broadcast,
it turns back on, enabling you to hear the alert broadcast. To turn
ALERT off, press ALERT again; ALERT disappears from the display.
NOTE: while ALERT is selected, no other stations can be tuned in
or received.
NOAA false alert note: False NOAA alerts may occur at various
times of day as the result of circumstances beyond the control of
the manufacturer of this receiver. If you receive such alerts, we
suggest that you turn the ALERT feature off.
SETTING THE TIME AND ALARM
The clock is a 12/24-hour clock, as a 12-hour clock showing PM in
the display starting at Noon.
To change from 12 to 24 hour time or vice versa:
1. With the radio turned off, do three short presses of the SET
button.
2. 12 or 24 appears in the display.
3. Press the MIN/UP or HOUR/DOWN buttons to change it.
4. Press SET to finalize it.
To set the time:
1. With the radio turned off, do a short press on the SET button.
2. While the hour flashes press the HR/UP or MIN/DOWN button
to set the hour.
3. Press SET again.
4. While the minute flashes press the HR/UP or MIN/DOWN button
to set the minutes.
5. Press SET to finalize
To set the alarm:
1. With the radio turned off, press the ALARM button and then the
SET button.
2. ALARM appears on the left of the LCD and the hour flashes.
3. Press HR/UP or MIN/DOWN button to set the alarm hour.
4. Press SET again.
SOLARLINK FR360
OWNER'S MANUAL
7