Télécharger Imprimer la page

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

President Cast Front Insert Model
Approved for use with Valor heater model 530 only
Requires the use of a 582CPB or 583CPB Closure Plate (sold seperately)
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and shall be
installed for the protection of children and other at-risk
individuals.
Applications
The President Cast Front for Insert 536CXBI is
intended to install on the Valor Portrait 530 heater
when installed as an insert fi replace.
The Valor model 530 heater with the 536CXBI
President Cast Front and 582 or 583 Closure Plate
comes ready for installation as an insert unit into
existing solid-fuel burning fi replaces provided space
and local codes permit.
4005304-01
©2015, Miles Industries Ltd.
All manuals and user guides at all-guides.com
P
ORTRAIT
536CXBI
Installation and Owner's Manual
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
INSTALLER
Leave this manual
with the appliance.
CONSUMER
Retain this manual for
future reference.
Notes: This kit must be installed
or serviced by a qualifi ed installer,
service agency or gas supplier.
These instructions are to be used
in conjunction with the main
installation instructions for the
above listed heater models.

Publicité

loading

Sommaire des Matières pour Valor PORTRAIT 536CXBI

  • Page 1 All manuals and user guides at all-guides.com ORTRAIT President Cast Front Insert Model 536CXBI Approved for use with Valor heater model 530 only Requires the use of a 582CPB or 583CPB Closure Plate (sold seperately) Installation and Owner’s Manual DANGER...
  • Page 2 All manuals and user guides at all-guides.com Kit Contents Top Baffle 536CXBI 1 Front Casting Assembly 1 Barrier Screen 1 Top Baffl e 1 Pack of Screws Casting Tolerances Due to the nature of cast iron, dimensional consistency may vary from one unit to the next and some variation in surface fi...
  • Page 3 All manuals and user guides at all-guides.com Dimensions & Clearances 20” ‘A’ 6-5/8” dia. Mantel Mantel See table Optional Top Outlet ‘B’ ‘D’ 2” ‘E’ 6-5/8” dia. 36” min. to combustibles 9” Finished hearth height Ensure base of heater is flush with finished hearth height, otherwise cast front will not fit. The 530 heater is approved to sit on wood shims.
  • Page 4 All manuals and user guides at all-guides.com 582CPB or 583CPB Closure Plate Installation (required) 1. Fit the top baffl e under the top panel of the appliance case. Secure with 2 thread forming Dimensions screws. 26” (660 mm) 2. Locate and secure mounting brackets to side of engine with 2 screws each side;...
  • Page 5 All manuals and user guides at all-guides.com 3. Secure Closure Plate to Mounting Brackets with 6 thread forming screws. 4. If the hooks have been shipped loose with the cast front, fi x them to the front at its top corners. Hang the front on the appliance.
  • Page 6 All manuals and user guides at all-guides.com Cleaning WARNING DO NOT TOUCH THE BARRIER SCREEN, DO NOT TOUCH THE BARRIER SCREEN, THE CAST FRONT OR THE GLASS WHILE THE CAST FRONT OR THE GLASS WHILE THEY ARE HOT! THEY ARE HOT! Let the fireplace cool first Let the fireplace cool first before cleaning it.
  • Page 7 Because our policy is one of constant development and improvement, details may vary slightly from those given in this publication. Designed and Manufactured by / for Miles Industries Ltd. 190 – 2255 Dollarton Highway, North Vancouver, B.C., CANADA V7H 3B1 Tel. 604-984-3496 Fax 604-984-0246 www.valorfi replaces.com...
  • Page 8 FOYER À GAZ RADIANT Devantre de fonte President pour encastrables 536CXBI Homologuée pour usage avec le foyer Valor 530 seulement Exige l’usage de la Plaque de fi nition 582CPB ou 583CPB (vendues séparément) Directives d’installation I N S TA L L AT E U R...
  • Page 9 All manuals and user guides at all-guides.com Contenu des kits Déflecteur du haut 536CXBI 1 Devanture de fonte 1 Pare-étincelles 1 Défl ecteur du haut 1 Ensemble de vis Variations de la fonte De par leur nature, deux articles de fonte fabriqués du même moule peuvent montrer de légères variations dans leurs dimensions et leur fi...
  • Page 10 All manuals and user guides at all-guides.com Dimensions et Dégagements 20” (508 mm) ‘A’ Dia. 6-5/8” (168 mm) Patte de Manteau manteau- voir table Sortie d’évacuation optionnelle sur le dessus ‘B’ ‘D’ 2” Dia. 6-5/8” ‘E’ (168 mm) Min. 36” jusqu’au combustibles 9”...
  • Page 11 All manuals and user guides at all-guides.com Plaque de fi nition 582CPB ou 583CPB Installation (exigée) 1. Placez le défl ecteur du haut sous le panneau de dessus de la boîte de foyer. Fixez-le avec 2 vis Dimensions autoformeuses. 26” (660 mm) 2.
  • Page 12 All manuals and user guides at all-guides.com 3. Fixez la plaque de fi nition aux supports de montage à l’aide de 6 vis autotaraudeuses. 4. Si les crochets ne sont pas installés, installez-les aux coins supérieurs de la devanture de fonte. Accrochez la devanture à...
  • Page 13 All manuals and user guides at all-guides.com Entretien AVERTISSEMENT NE TOUCHEZ PAS LE NE TOUCHEZ PAS LE PARE-ÉTINCELLES PARE-ÉTINCELLES, LA , LA DEVANTURE OU LA FENÊTRE LORSQU’ILS DEVANTURE OU LA FENÊTRE LORSQU’ILS SONT CHAUDS! SONT CHAUDS! Laissez le foyer refroidir avant de Laissez le foyer refroidir avant de le nettoyer.
  • Page 14 All manuals and user guides at all-guides.com Liste de pièces Description Numéro Numéro alternatif Devanture complète 568979 040A519 Boulon, charnière du garde-cendres 568999 420K558 Garde-cendres 568989 540K048AZ Rondelle 532529 100B810 Aimant 569009 020A085 Devanture de fonte 568929 050A255AZ Crochet, côté droit 568949 330A923 Crochet, côté...