Publicité
Les langues disponibles
Les langues disponibles
Flooring
For proper installation, you must place this
refrigerator on a level, hard surface that is the
same height as the rest of the floor.
This surface should be strong enough to support a
fully loaded refrigerator.
To protect the finish of the flooring during
installation, cut a large section of the cardboard
carton and place it under the refrigerator where
you are working.
When moving the refrigerator, you need to pull and
push it straight forwards or back.
Do not wiggle it from side to side.
When installing, servicing or cleaning
behind the refrigerator, be sure to pull the
CAUTION
unit straight out and push back in straight
after finishing.
Important: Make sure that you can easily move
your refrigerator to its final location by measuring
doorways (both width and height), thresholds,
ceilings, stairways, etc.
The following chart details the exact height and
depth of this Samsung Side by Side Refrigerator.
DA68-02981C-00.indb 17
All manuals and user guides at all-guides.com
Dimensions [inch (mm)]
Width
Depth
Height
• Make sure you disconnect the water supply line
English - 17
RS25H5121** RS25H5111** RS25H52****
Only Cabinet
With Leg Front
Only Cabinet
With Door
With Handle
90° Open
F 1169 / R 1295.5
135° Open
F 1017.5 / R 1107
Only Cabinet
With Hinge
With Door
• Allow clearance to the right, left, back
and top when installing.
This will help reduce power consumption
and keep your energy bills lower.
BEFORE removing the freezer door.
To avoid damage, refer to 'Separating the
water line from the refrigerator' in the manual
(page 19).
Model
908
915.5
784
857.5
919
1742.5
1776
1776
2014. 1. 28.
10:47
Publicité
