Radio - Kenwood KMM-112 Mode D'emploi

RADIO

Search for a station
1
Press repeatedly to select TUNER.
2
Press repeatedly (or press
RC-406) to select FM1/ FM2/ FM3/ AM.
3 Press S / T (or press S /
for a station.
• To change the searching method for S / T: Press
repeatedly.
AUTO1 : Automatically search for a station.
AUTO2 : Search for a preset station.
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number buttons
(1 to 6).
• To select a stored station: Press one of the number buttons
(1 to 6) (or press one of the number buttons (1 to 6) on
RC-406).
Direct Access Tuning (using RC-406)
1
Press DIRECT to enter Direct Access Tuning.
2
Press the number buttons to enter a frequency.
3
Press to search for a station.
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step
Access Tuning is automatically canceled.
Other settings
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to make a selection (see the following table), then
press the knob.
3 Repeat step
4 Press and hold
To return to the previous setting item, press
TUNER SETTING
/ on
AUTO
on RC-406) to search
MEMORY
MONO SET
NEWS SET
REGIONAL
AF SET
TI
PTY SEARCH
CLOCK
TIME SYNC
2 , Direct
2 until the desired item is selected or activated.
to exit.
YES: Automatically starts memorizing 6 stations with good reception. ; NO: Cancels.
• Selectable only if [NORMAL] is selected for [PRESET TYPE]. ( 4)
ON: Improves the FM reception, but the stereo effect may be lost. ; OFF: Cancels.
ON: The unit will temporarily switch to News Programme if available. ; OFF: Cancels.
ON: Switches to another station only in the specific region using the "AF" control. ;
OFF: Cancels.
ON: Automatically searches for another station broadcasting the same program in the
same Radio Data System network with better reception when the current reception is
poor. ; OFF: Cancels.
ON: Allows the unit to temporarily switch to Traffic Information if available ("TI"
lights up). ; OFF: Cancels.
Selects the available Program Type ( 8), then, press S / T to start.
ON: Synchronizes the unit's time to the Radio Data System station time. ;
OFF: Cancels.
.
Default: XX
7
ENGLISH