Publicité
Les langues disponibles
Les langues disponibles
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-003 (B)/NMB-003(B) standards requirements.
This device complies with Industry Canada license-exempt RSS standard(s). Operation
is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an
uncontrolled environment.
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to
avoid danger or property loss. Please read all the safety information carefully before
using.
Laws and Regulations
Use of the product must be in strict compliance with the local electrical safety
regulations.
Transportation
Keep the device in original or similar packaging while transporting it.
Keep all wrappers after unpacking them for future use. In case of any failure
occurred, you need to return the device to the factory with the original wrapper.
Transportation without the original wrapper may result in damage on the device
and the company shall not take any responsibilities.
Do not drop the product or subject it to physical shock. Keep the device away from
magnetic interference.
Power Supply
The input voltage for the device should meet the Limited Power Source (5 VDC, 2 A)
according to the IEC61010-1 standard. Please refer to actual products and technical
specifications for detailed information.
Make sure the plug is properly connected to the power socket.
DO NOT connect multiple devices to one power adapter, to avoid over-heating or
fire hazards caused by overload.
Battery
The external rechargeable battery type is 18650, and the battery size should be
19 mm × 70 mm. The rated voltage is 3.6 VDC, and the battery capacity is 3200 mAh.
For long-term storage of the battery, make sure it is fully charged every half year to
ensure the battery quality. Otherwise, damage may occur.
CAUTION: Risk of explosion if the battery is replaced by an incorrect type.
Improper replacement of the battery with an incorrect type may defeat a safeguard
(for example, in the case of some lithium battery types).
Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut
the battery, which may result in an explosion.
Do not leave the battery in an extremely high temperature surrounding
environment, which may result in an explosion or the leakage of flammable liquid or
gas.
Do not subject the battery to extremely low air pressure, which may result in an
explosion or the leakage of flammable liquid or gas.
Dispose of used batteries according to the instructions.
Maintenance
If the product does not work properly, please contact your dealer or the nearest
service center. We shall not assume any responsibility for problems caused by
unauthorized repair or maintenance.
Wipe the device gently with a clean cloth and a small quantity of ethanol, if
necessary.
If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the device may be impaired.
Clean the lens with soft and dry cloth or wiping paper to avoid scratching it.
Using Environment
Make sure the running environment meets the requirement of the device. The
operating temperature shall be -30 °C to 55 °C (-22 °F to 131 °F), and the operating
humidity shall be from 5% to 95%.
DO NOT expose the device to high electromagnetic radiation or dusty
environments.
DO NOT aim the lens at the sun or any other bright light.
Place the device in a dry and well-ventilated environment.
Emergency
If smoke, odor, or noise arises from the device, immediately turn off the power,
unplug the power cable, and contact the service center.
Laser
When any laser equipment is in use, make sure that the device lens is not
exposed to the laser beam, or it may burn out. The laser radiation emitted
from the device can cause eye injuries, burning of skin or inflammable
substances. Before enabling the laser ranging function, make sure no human or
inflammable substances are in front of the laser lens. Do not place the device
where minors can fetch it.
Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict, Binjiang District,
Hangzhou, Zhejiang 310052, China
Hangzhou Microimage Software Co., Ltd.
COMPLIANCE NOTICE: The thermal series products might be subject to export controls
in various countries or regions, including without limitation, the United States,
European Union, United Kingdom and/or other member countries of the Wassenaar
Arrangement. Please consult your professional legal or compliance expert or local
government authorities for any necessary export license requirements if you intend to
transfer, export, re-export the thermal series products between different countries.
Rechtliche Informationen
HAFTUNGSAUSSCHLUSS
DIESE BEDIENUNGSANLEITUNG UND DAS BESCHRIEBENE PRODUKT MIT SEINER
HARDWARE, SOFTWARE UND FIRMWARE WERDEN, SOWEIT GESETZLICH ZULÄSSIG, IN
DER „VORLIEGENDEN FORM" UND MIT „ALLEN FEHLERN UND
IRRTÜMERN" BEREITGESTELLT. HIKMICRO GIBT KEINE GARANTIEN, WEDER
AUSDRÜ CKLICH NOCH STILLSCHWEIGEND, EINSCHLIEßLICH, ABER OHNE DARAUF
BESCHRÄNKT ZU SEIN, MARKTGÄNGIGKEIT, ZUFRIEDENSTELLENDE QUALITÄT ODER
EIGNUNG FÜ R EINEN BESTIMMTEN ZWECK. DIE NUTZUNG DES PRODUKTS DURCH SIE
ERFOLGT AUF IHRE EIGENE GEFAHR. IN KEINEM FALL IST HIKMICRO IHNEN
GEGENÜ BER HAFTBAR FÜ R BESONDERE, ZUFÄLLIGE, DIREKTE ODER INDIREKTE
SCHÄDEN, EINSCHLIEßLICH, ABER OHNE DARAUF BESCHRÄNKT ZU SEIN, VERLUST VON
GESCHÄFTSGEWINNEN, GESCHÄFTSUNTERBRECHUNG, DATENVERLUST,
SYSTEMBESCHÄDIGUNG, VERLUST VON DOKUMENTATIONEN, SEI ES AUFGRUND VON
VERTRAGSBRUCH, UNERLAUBTER HANDLUNG (EINSCHLIEßLICH FAHRLÄSSIGKEIT),
PRODUKTHAFTUNG ODER ANDERWEITIG, IN VERBINDUNG MIT DER VERWENDUNG
108
Deutsch
Publicité
