Philips PT717 Mode D'emploi page 13

Problem Possible cause
The shaver does The shaving heads are damaged
not shave as well or worn.
as it used to.
Long hairs obstruct the shaving
heads.
You have not inserted the shaving
heads properly.
The shaver does The temperature of the shaver is
too high. In this case, the shaver
not work when I
press the on/off does not work.
button.
You have not connected the
shaver to the mains. This shaver
can only be used directly from the
mains.
Solution
Replace the shaving heads (see chapter
'Replacement').
Clean the shaving heads one by one
(see chapter 'Cleaning and maintenance').
Make sure that the projections of the shaving
heads it exactly into the recesses (see
chapter 'Replacement').
As soon as the temperature of the shaver has
dropped suficiently, you can switch on the
shaver again.
Put the small plug in the shaver, put the
adapter in the wall socket and press the
on/off button again.
English
13