Philips PT717 Mode D'emploi page 10

English
10
7 Put the retaining frame back into the shaving unit (A) and turn the
lock clockwise (B).
8 Insert the lug of the shaving unit into the slot in the top of the shaver.
Then close the shaving unit.
Note: If the shaving unit does not close smoothly, check if you have inserted
the shaving heads properly and if the retaining frame is locked.
storage
Put the protection cap on the shaver every time you have used it, to
-
prevent damage.
replacement
For maximum shaving performance, we advise you to replace the shaving
heads every two years.
Only replace the shaving heads with original HQ8 Philips Shaving Heads.
1 Switch off the shaver. Disconnect the shaver from the mains.
2 Press the release button to open the shaving unit.
3 Pull the shaving unit off the shaver.
4 Turn the lock anticlockwise (A) and remove the retaining frame (B).