hestan KRW Serie Mode D'emploi page 18

CONTROLS AND OPERATION
Padlock icon
The padlock icon shows up when the
EN temperatures are set up. The icon shows
that it is or is not possible to modify the
compartment's temperatures anymore.
Usually an open yellow padlock means you can
scroll up or down with a finger on the display to
select the desired temperature and touch OK for
confirming.
Whereas a closed padlock can be seen if the
user has activated some functions (described
later) that modify the settings of the Fridge,
ExtendFresh and Freezer Compartment.
Therefore the user will not be able to change the
temperature of the compartments anymore.
If a special function is set (for example Holiday,
MaxCool, FreshSelect
padlock will be seen closed and it will not be
possible to change the temperature of the
compartments as long as the function is active,
or if it is manually deactivated.
14
©2022 Hestan Commercial Corporation
+ 56
OFF
+ 55
+ 54 °F
+ 53
OK
+ 52
+ 56
OFF
+ 55
+ 54 °F
+ 53
OK
+ 52
™ , etc.), the yellow
(CONT.)
Display Information and Malfunction Messages
An integrated control system provides
information through light signals or text
messages visualized on the display. Problems
that cannot be solved by the user are reported
through a fault code. Some messages or alarms
frequently appear for particular conditions of
use or during start-up. In these cases, deactivate
the audible alarm by touching the Alarm button
and leave the appliance running, and limit
the opening of the doors for about 10-12 hours.
A list of malfunction messages is located at the
end of this manual.
If a malfunction message continues after repeated
attempts, contact Hestan Customer Care.
54
Functions
+
°F
46
+
°F
Settings
1
-
°F