Publicité
Les langues disponibles
Les langues disponibles
NOTE :
•
Before washing, please make sure the washing machine is installed properly.
•
Your appliance is thoroughly checked before it leaves the factory. To remove
any residual water and to neutralize potential odors, it is recommended
to clean your appliance before first use. For this reason, start the Cotton
program at 90°C without laundry and detergent.
Calibration :
It's recommended to calibrate the washing machine, so that provide the best
performance.
The appliance is able to detect the amount of laundry loaded. This function
is optimizing the product performance by minimizing energy and water
consumption, saving you money and time. For this reason it's recommended to
calibrate the appliance for best use.
1. Remove all accessories from the drum and close the door.
2. Plug in the appliance.
3. Switch on the washing machine and press
4. Press
1. Turn on the tap.
96
FP1012WH jun2022.indd 96
WASHING
simultaneously for 10 seconds until "t19" is displayed.
to start the appliance and wait till "****" is displayed.
3. Sort the laundry and put it into the drum.
Do not get laundry caught in the door. It can
cause damage to the door seal.
Do not put too much laundry into the drum. It
can cause excessive vibration or damage to the
appliance.
2. Plug in the appliance.
and
6/6/2022 2:51 PM
Publicité
