AUDIOropa cross:talk a58100 Mode D'emploi page 9


Status indicator. This lights up red when the unit is ready for operation.

Microphone socket: Insert the microphone neck and tighten the knurled screw to
fix it in place.

Loudspeaker: Outputs the transmission of the external communication unit.

Without relevant function.

Intercom button: Press the button to start voice transmission via the external
communication unit. Press the button again to end the transmission. During an active
transmission, the LED above the intercom button lights up blue.

Without relevant function.
Side view

Level switch. There are 3 level settings available:
Switch to front: Loud
Middle position: Standard
Switch to rear: Soft
The standard setting is used by default.

English 9