Publicité
Les langues disponibles
Les langues disponibles
Installation instructions
1. Place the microphone base in a suitable location.
2. Attach the external communication unit to a glass pane or other smooth and clean
surface. To do this, peel off the protective paper from the adhesive surface and
stick the communication unit in the desired location.
3. Lay the cable using the cable holders and cable ties. Stick the self-adhesive cable
fixings in the desired place and fasten the cable to the cable holders with the
cable ties.
4. If necessary, the strain relief can be placed over the cable and fixed with the included
double-sided adhesive tape strip.
Specifications
Power supply:
Power consumption:
Connectors:
Signal-to-noise ratio:
Frequency response:
Audio sampling:
Temperature range:
Humidity range:
Dimensions / weight:
12 English
DC 12 V / 1,5 A
≤ 5 W
Power supply, analogue audio output, network
connector (without function), PS/2 connector
for external communication unit
>90dB
20 Hz - 16 KHz
8 KHz - 32 KHz
-10°C - 55°C
≤ 90% RH (non-condensing)
Microphone base 95 x 160 x 46.5 mm / 0.44 kg
External unit 83 x 102 x 24 mm / 0.2 kg
Publicité
