Philips HD4686 Mode D'emploi page 12

EnglisH
1
cleaning and descaling
Always unplug the base before you clean it
Always remove the kettle from the base before you clean the kettle.
Never immerse the kettle or its base in water.
Do not use abrasive cleaning agents, scourers etc. to clean the kettle.
cleaning the kettle and the base
Clean the outside of the kettle and the base with a soft cloth
1
moistened with warm water and some mild cleaning agent.
Do not let the moist cloth come into contact with the cord, the plug and
the connector of the base.
Cleaning the ilter
Scale is not harmful to your health but it may give your drink a powdery
taste. The anti-scale ilter prevents scale particles from ending up in your
drink.
Clean the Triple action anti-scale ilter regularly in the following way:
Take the entire ilter out of the kettle (Fig. 14).
1
Slide the basket off the ilter and take the stainless steel mesh out

of the basket.
To clean the mesh, squeeze and rotate it under a running tap.

Gently clean the ilter with a soft nylon brush.
4
Put the mesh back into the ilter basket and slide the basket onto
5
the ilter again. Then slide the ilter back into the kettle.
Note: You can also clean the ilter in two other ways. Leave the ilter in the
kettle when you descale the kettle (see section 'Descaling the kettle') or
remove it from the kettle and clean it in the dishwasher.