Philips HD4686 Mode D'emploi page 11

a keeping water warm at the current temperature
1 Press the KEEP WARM button (Fig. 12).
Note: If the current temperature is lower than 60°C, you irst have to set the
temperature (see point B below).
B keeping water warm at a higher temperature than the
current temperature
1 Press the SET TEMP button one or more times to set the desired
temperature (see section 'Setting the temperature').
2 Press the KEEP WARM button (Fig. 12).
3 Press the on/off button.
The light ring round the KEEP WARM button and the on/off button
,
go on to indicate that the KEEP WARM function is
activated (Fig. 13).
The kettle keeps the water warm for 30 minutes.

When the kettle heats up the water to keep it at the selected
temperature, the light of the desired temperature lashes. When the
water has reached the selected temperature, the light of the desired
temperature lights up continuously.
After 30 minutes, you hear an audible signal and the kettle switches
,
off automatically.
Note: You can always stop the keep-warm process at any time. To do so, press
the KEEP WARM button or the on/off button or remove the kettle from the
base.
Note: If you remove the kettle from the base, the set keep-warm temperature
is lost.
Note: If the selected keep-warm temperature is 100°C, the kettle keeps the
water at a temperature between 90°C and 100°C to avoid excessive steam
development. If the selected keep-warm temperature is 80°, 60° or 40°C, the
kettle keeps the water at a temperature between 5°C below and 5°C above
the selected temperature.
EnglisH
11