Publicité
Les langues disponibles
Les langues disponibles
User Guide
Packing list
The DEVItector™ II V2 set comprises:
1. One High Voltage Unit (HVU) in transportation
cardboard box with shock absorbing foam.
2. One Magnetic Tracer, one Magnetic tracer - Hand
held and one earphone headset to be connected
to the tracer outlet placed in second transportation
cardboard box with shock absorbing foam.
Note: Keep transportation boxes for shipping in case
of repair which must be performed by manufacturer
(Danfoss A/S).
Enclosed in the top bag attached to the HVU you will find:
3. Supply cord for single phase grounded main
supply according to EN/IEC 60799: Appliance
couplers and cord sets.
Two types are supplied, a type conformant to Danish
standards and a type conforming to German standards
(Schuco type).
Note: The main supply cord and main plug must
comply with national regulations.
4. Two identical mechanical keys to lock / unlock
the mains supply within the HVU.
5. Two yellow high voltage outlet cables attached
to the HVU within the top bag. The cables are tied
together to minimize radio noise emission.
6. This User Guide.
6 | ©Danfoss | FEC | 2022.07
DEVItector™ II V2
Unpacking
The equipment should be kept above condensation
temperature of the ambient air. If the equipment has
been stored at a lower temperature and then brought
into a warmer air, it must be acclimatized before use.
Transportation
The transportation cardboard box should be used for
transportation to prevent damage from dropping. In
particular transportation by air or ship will require a
high mechanical shock protection.
Avoid any conducting material like moisture, metal
or carbon powder to enter the equipment. Likewise,
avoid any spillage of liquids over the equipment.
BC421332622232fr-FR0101
Publicité
