Publicité
Les langues disponibles
Les langues disponibles
User Guide
9. Glossary
RCD
HVU
Burner
Tracer
Connection coupling
Screen
Conductor
10. Ordering information
For safety reasons do only use replacements delivered from Danfoss A/S according to the table below.
Item no.
12609001
Magnetic tracer on crutch for DEVItector™ II V2
12609002
DEVItector™ II V2 High Voltage Unit (Burner) with Magnetic tracer - Hand held
BC421332622232fr-FR0101
DEVItector™ II V2
Residual Current Device.
An electronic device normally located in the electric supply branch of a building.
It monitors the difference between in-going and outgoing current and if this
difference exceeds a threshold, say 30mA, it will cut off the mains supply.
High Voltage Unit, also known as the burner.
The HVU of the DEVItector™ II V2 equipment.
An electromagnetical sensor which transform a magnetic flux into an acoustic
signal. The amplitude indicates the proximity to the heating cable.
The electric connection between the conductive (cold) and resistive (warm) parts
of a complete heating cable.
Electrical shielding surrounding the live parts of the heating cable. The screen may
be realized as twisted wires or a wrapped foil.
Common term for either a heating wire or the screen
Description
EAN no.
5703465026602
5703466111352
2022.07 | FEC | ©Danfoss | 27
Publicité
