Télécharger Imprimer la page

Inventum SKV1784R Mode D'emploi page 23

Publicité

Les langues disponibles

Les langues disponibles

4
usage
The appliance features external controls. Check that the voltage in your home corresponds with the voltage printed on the
back of the appliance and plug it in a socket.
Important: the display will only be illuminated when a key is pressed or a compartment door is opened, at all other times the
display will be in a standby state.
Important: the control panel will automatically lock itself -
the panle must be unlocked by pressing and holding the lock key for 3 seconds until the lock icon disappears from the
display.
Note: the standard operating temperature for the cooling compartment should be between 0°C and 4°C. For the freezer
compartment this should be between -18°C and -24°C.
Note: the temperature of the freshly stored food and how often the door is opened, affects the temperature in the cooling
compartment. If required, change the temperature setting.
CONTROL PANEL
1. key for setting the freezer compartment temperature
2. key for function setting
3. key for setting the cooling compartment temperature
4. key lock
DISPLAY
A. Freezer compartment temperature
B. Cooling compartment temperature
C. Vacation icon
D. Quick cool icon
E. Quick freeze icon
F. Locking icon
SETTING THE TEMPERATURE OF THE FREEZER COMPARTMENT
To change the temperature of the freezer compartment, press the key FRZ. TEMP . The temperature of the freezer
compartment can be set between -16°C and -24°C.
Press the key FRZ. TEMP until the required temperature is shown on the display. Please note that during the temperature
setting process the freezer temperature on the display will flash. Once the required temperature is set the freezer
temperature will flash for a few seconds, the display will be automatically locked and after approximately 30 seconds the
display turns off.
The temperature of the freezer compartment will be shown in the display when a compartment door is opened or a button
is pressed.
The ice twister ensures you always have ice cubes. Fill the 2 ice cube trays with water, leave it to freeze and turn them over
with the twist knobs.
SETTING THE TEMPERATURE OF THE COOLING COMPARTMENT
To change the temperature of the cooling compartment, press the key REF. TEMP. The temperature of the cooling
compartment can be set between 2°C and 8°C.
Press the key REF. TEMP until the required temperature is shown on the display. Please note that during the temperature
setting process the temperature of the cooling compartment on the display will flash. Once the required temperature is
set the cooling temperature will flash for a few seconds, the display will be automatically locked and after approximately 30
seconds the display turns off.
The temperature of the cooling compartment will be shown in the display when a compartment door is opened or a button
is pressed.
The appliance now cools continuously until the set temperature has been reached. Do not place anything in the appliance
until the set temperature is reached. This usually takes 2 or 3 hours. Then set the thermostat at the desired setting and place
food into the refrigerator.
Set the appliance on a lower temperature setting when the ambient air temperature rises to maintain the temperature
inside the appliance.
. Before adjusting the temperature or selecting any function
A
1
2
C
D
B
3
4
E
F
English
23

Publicité

loading