Publicité
Les langues disponibles
Les langues disponibles
Installation
6
Bowl Mounting with WashBar (to Bracket and Wall)
WARNING Ensure bowl is completely
seated in the wall bracket
and securely fastened to
the wall at point A.
CAUTION Bracket is not
intended to support
the weight of bowl
for an extended
period of time. Be
sure to secure the
bowl to the wall
using appropriate
fasteners.
7
Install P-Trap
Drain Adapter
8
Strainer and Drain Cap
WashBar removed for clarity.
Drain cap is labeled front and back.
Be sure front is facing the user. Top
surface of drain cap should be sloped
away from user.
Position drain cap over trough strainer,
aligning tabs into drain. Push drain
A
cap down until drain cap is flush with
basin. Grommets should hold drain cap
securely against drain trough walls.
To remove drain cap, carefully slip flat
B
screwdriver into left or right hand corner
of drain cap and gently lift upwards.
Bradley • 215-1843 Rev. E; ECN 18-08-023
A
P-Trap
Position bowl above wall bracket.
Press firmly on the back of the bowl
to seat the bowl flange into the wall
bracket lip. Ensure bowl is level.
1 station shown, 2 station similar.
Front
Secure the bowl to the wall anchors
B
using fasteners per the structural
rough-in requirement (supplied by
installer).
2/4/2019
LVQD2
Note Angle of
Drain Cap
13
Publicité
