Autosen AV002 Notice D'utilisation page 11

5.1 Measuring range
V
eff
I
out
Response delay
5.2 Switching output behaviour
1: Time delay after the switching threshold has been exceeded
2: Time delay after the switching threshold has been exceeded
3: Switch-off
4: Switching threshold
5: Delay
V = vibration velocity
ss
t = time
Implementation of the time delays
The time delay starts when the defined switching threshold is exceeded (1) / (2).
The time delay is cancelled when the value falls below the switching threshold
(without switch-off). The switch-off is triggered when the switching threshold is
exceeded during a full time delay (3).
mm/s 0���25
mA 4���20
s 1���60
1 2
5
UK
4
3
t [s]
11