Télécharger Imprimer la page

Philips Saeco Minuto HD8867 Guide De Démarrage Rapide page 23

Publicité

www.saeco.com/support
The descaling solution will
When this icon is displayed,
be dispensed at intervals
the water tank is empty.
(duration: approx. 25 min).
La soluzione decalcifi cante
Quando viene visualizzato
sarà erogata ad intervalli
questo simbolo, il serbatoio
(durata: circa 25 min).
dell'acqua è vuoto.
1
2
3
1 - Raise the dispensing spout;
2 - Press the side buttons;
3 - Empty the drip tray and place it back.
1 - Alzare l' e rogatore caff è;
2 - Premere i tasti laterali;
3 - Vuotare la vasca raccogligocce e reinserirla in posizione.
Place the container under the dispensing spout.
Press the
button to start the rinse cycle.
Riposizionare il contenitore sotto l' e rogatore caff è.
Premere il tasto
per avviare il ciclo di risciacquo.
All manuals and user guides at all-guides.com
MAX
Rinse the water tank and fi ll it with fresh water up to the
MAX level. Place it back into the machine.
Risciacquare il serbatoio e riempirlo con acqua fresca fi no
al livello MAX. Reinserirlo nella macchina.
2
Fill the milk carafe with water up to the MIN level and insert it into the machine. Pull out the
milk carafe dispenser to the right up to the
Riempire la caraff a del latte con acqua fi no al livello MIN ed inserirla nella macchina.
Estrarre l' e rogatore della caraff a verso destra fi no al simbolo
When the amount of water needed for the rinse cycle has
been completely dispensed, this icon is displayed. Press the
button to quit the descaling cycle.
Quando l'acqua richiesta per il risciacquo è stata comple-
tamente erogata, la macchina visualizza questo simbolo.
Premere il tasto
Instructions
icon.
per uscire dal ciclo di decalcifi cazione.
23
Istruzioni
Empty the container.
Remove and empty the ca-
rafe.
Vuotare il contenitore.
Rimuovere e vuotare la ca-
raff a.
.
Note If you had not fi lled
up the water tank to MAX
level, the machine might
require another rinse
cycle.
Refi ll the water tank and
repeat from point 16.
Nota: Se il serbatoio
dell'acqua non viene
riempito fi no al livello
MAX la macchina può ri-
chiedere l' e secuzione di
un'altro ciclo di risciac-
quo. Riempire il serbato-
io dell'acqua e reinserir-
lo nella macchina.
Ripetere dal punto 16.

Publicité

loading