Samsung 4 Serie Mode D'emploi page 21

Changing the Mode
❑
Provides the function to turn on the 3D Effect. You can choose between Mode1 and
Mode2. To achieve the 3D effect, the 3D glasses shutter back and forth from the left to
right and vice versa (left/right sync).
• Off : Turns the 3D Effect function off.
• Mode1 : Mode 1 operates with right sync first.
• Mode2 : Mode 2 operates with left sync first.
• 2D : Provides picture converted 3D to 2D. You can choose this to watch 2D
picture temporally when you feel dizzy, but you should choose Off to end 3D Effect
completely.
If the 3D effect is not working properly, it means the Mode and 3D glasses may not
N
be syncing properly. To put them in sync, switch to the other mode.
Changing the Format
❑
Select the optimal input format to match your graphic cards or 3D Software.
• Checker Board : If the output format of your graphic card or 3D software is
Checkerboard, select this input format.
• Horizontal : If the output format of your graphic card or 3D software is Horizontal interleaved, select this input format.
• Vertical : If the output format of your graphic card or 3D software is Vertical interleaved, select this input format.
Picture Reset → Reset Picture Mode / Cancel
❑
Resets all picture settings to the default values.
Select a picture mode to be reset. The reset is performed for each picture mode.
N
Setting up the TV with your PC
Preset: Press the SOURCE button to select PC mode.
N
Auto Adjustment
❑
Auto Adjustment allows the PC screen of set to self-adjust to the incoming PC video
signal. The values of fine, coarse and position are adjusted automatically.
This function does not work in DVI-HDMI mode.
N
Press the TOOLS button to display Tools menu.
T
You can also set the adjustment by selecting Tools → Auto Adjustment.
Screen
❑
Coarse
„
Adjusts the frequency when vertical noise appears on the screen.
Fine
„
Adjusts the screen to be clearer.
PC Position
„
Adjust the PC's screen positioning if it does not fit the TV screen. Press the ▲ or ▼
button to adjusting the Vertical-Position. Press the ◄ or ► button to adjust the
Horizontal-Position.
Image Reset
„
You can replace all image settings with the factory default values.
All manuals and user guides at all-guides.com
English - 21
Picture Options
▲
Size : 16:9
Screen Mode : 16:9
Digital NR : Auto
HDMI Black Level : Normal
Film Mode : Off
Screen Burn Protection
3D Effect
Move Enter Return
3D Effect
Mode : Off
Format : Checker Board
Move Enter Return
Advanced Settings
Picture Options
Picture Reset
Brightness : 45
Sharpness : 50
Auto Adjustment
Screen
Advanced Settings
Picture Options
Picture Reset
Screen
Coarse
Fine
PC Position
Image Reset
Move Enter Return
▶
▶
►
►
50
44