Publicité
Les langues disponibles
Les langues disponibles
2610051843_GLI18V-1200C 10/1/18 10:24 AM Page 11
H.
Timer – Allows the light or group of
lights to be automatically switched
on or off after a specified amount
of time.
Interval – Allows the light or group
of lights to be automatically
switched on or off at a specified
time of day.
▶ Service
Preventive maintenance performed by
un au thorized personnel may result in
misplacing of internal wires and
components which could cause serious
hazard. We recom mend that all tool
service be performed by a Bosch
Factory Service Center or Authorized
Bosch Service Station. SERVICE MEN:
Disconnect tool and/or charger from
power source before servicing.
▶ Batteries
Be alert for battery packs that are
nearing their end of life. If you notice
decreased
significantly shorter running time
between charges then it is time to
replace the battery pack. Failure to do
so can cause the tool to operate
improperly or damage the charger.
All manuals and user guides at all-guides.com
Connectivity
Maintenance
To avoid accidents always dis connect the tool from the power
supply before cleaning or performing any main tenance.
NO USER SERVICE-
ABLE PARTS INSIDE.
tool
performance
I.
Tool alerts – tapping the 'alerts
triangle' will display any alerts
received from the tool.
J.
Info button – displays tool
information and specifications.
▶ Cleaning
damage plastic parts. Some of these
are: gasoline, carbon tetrachlo ride,
chlo rinated cleaning solvents, ammonia
and house hold detergents that contain
ammonia.
To avoid damage, clean the plastic lens
of the cordless area light only with a
dry, soft cloth. Do not use cleaning
agents or solvents.
or
11
Certain
cleaning
agents and sol vents
Publicité
