Publicité
Commissioning and operation
6.2.2
Test that the manual release functions
NOTICE
❚ The manual release is designed for activation via a Bowden cable.
❚ Releasing an individual brake circuit is only possible electrically.
Abb. 16
Turning direction of the lever
Motor and brake are de-energised.
14. Suspend Bowden cable (not included in the delivery package) and pull with approx. 800 N.
-
The drive must be able to be turned freely. A low residual torque is permitted.
15. Release the lever.
-
Torque must be available!
The preparations for commissioning are completed.
6.3
Commissioning
1. Switch on drive system.
2. Carry out a braking test.
INTORQ | BA 14.0197 | 04/2016
DANGER
Danger: rotating parts!
The drive system must be free of loads. The motor must not run!
38
Publicité
