Publicité
Les langues disponibles
Les langues disponibles
The following equipment is available at an extra price and
must be ordered separately:
1. Piped–Away Exhaust
(Standard equipment for
International Models)
. . . . . . .
2. Speed Control
. . . . . . . . . . . . .
3. Shroud Kit (for
collet models only)
. . . . . . . . .
1. To order a tool with a Locking Lever, select the
desired model and add an "L" to the end of the
existing number.
Example:
CA200RG4L
Anytime a tool is ordered with a Low–Profile
Concentric Flange, it will come equipped with a
Locking Lever from the factory.
NEW GRINDER TO ACCESSORY COLOR MATCHING GUIDE
Ingersoll–Rand has pioneered a new color code system
designed to:
1.
Simplify the identification of rated tool speed via a
unique corresponding color match.
2.
Easily communicate the appropriate backing pads and
All manuals and user guides at all-guides.com
PLACING TOOL IN SERVICE
Part No. LG1–K284
Part No. LG1–A1015
Part No. LA1–L980
HOW TO ORDER CUSTOM MODELS
(READ FROM LEFT TO RIGHT)
4
All the models listed above can be changed to front
exhaust tools by reversing the Flow Ring and aligning
the indicator marks with the letter "F" on the Housing.
To order a front exhaust tool from the factory,
substitute the letter "F" for the letter "R" in the above
models. Example: CA200RG4 Rear Exhaust Model
becomes CA200FG4 Front Exhaust Model.
2. To order a tool with a Low–Profile Concentric Flange,
select the desired model and add a "C" to the end of
the existing number. Concentric Flanges are not
available for front exhaust models.
Example:
CA200RG4C
accessories for each tool through a matching color
code system on the backing pads and/or other
corresponding Grinder accessories.
3.
The chart below demonstrates the color code system
between the Grinder and the accessory.
(Dwg. TPD1146–1)
Publicité
