Publicité
Les langues disponibles
Les langues disponibles
EN
After a few moments the water will turn into steam and there
will be no more coulure.
12) When activating the steam trigger (2), a lot of water can flow.
This may be due to a residue of steam from the previous use
that has turned into water. Empty this water by operating the
steam trigger over a bucket or sink. Once this water has passed,
you can use your device quietly.
13) When using the accessories, the surface you are cleaning may
be wet. This is due to the steam that turns into water in contact
with this surface. Provide a sponge or cloth to wipe this surface.
14) After use, press the switch (12) in the OFF position and
disconnect.
Be careful, never direct steam on yourself or anyone else
as it may cause burns.
STORAGE
Always empty the Steamer after use. Never leave water in the tank
when storing the unit.
1 Turn off the power by unplugging the Steamer.
2 Empty all remaining tank pressure by pressing the steam trigger
(2).
3 Allow the unit to cool completely (10 minutes minimum).
4 When the appliance is cold, lock the steam trigger and remove
the accessories.
5 Empty all remaining water from the tank by tilting the unit to one
end. Never leave water in the tank when the unit is not in use or
stored.
6 Replace the filler cap and store the Steamer in a safe and dry
place.
1 0
Publicité
