Publicité
Les langues disponibles
Les langues disponibles
EN
CAUTION: If the filler cap is opened too quickly, without
taking the necessary precautions, there is a very high risk of
injury. The metal parts can be extremely hot; avoid contact
with the skin. Risk of burns.
NOTE: The filler cap will not unscrew without pressure.
PRESENTATION
1 Handle Operation.
The steam trigger (2) is located
in the handle and the steam
trigger lock latch is located
under the handle (3). The lock
has two positions: OFF / LOCK
and ON / UNLOCK. Press the
front of the steam trigger lock
latch to lock the steam (A) and
press the back to unlock (B) the
steam.
2 Releasing Steam.
When the pressure gauge
(6) reaches the green zone,
the Steamer is ready for use
(maximum pressure of 5 bar).
Press the steam trigger lock latch
(3) to the ON position (B) and
press the steam trigger (C) to
obtain a steam jet. Release the
trigger to stop the jet of steam.
3 After use.
Lock the steam trigger in the OFF position (A) to prevent accidental
operation.
30
"LOCKED OFF" POSITION
(1)
HANDLE
ON/OPERATING
POSITION
TRIGGER
LOCK (UN-LOCKED)
8
(2)
STEAM
TRIGGER
(3)
TRIGGER
LOCK (LOCKED)
Publicité
