Publicité
BMW 6 Coupé
2005 - ...
Ref. 1660T30
Fitting instructions
1) Disassemble the bumper and the plastic locking piece, remove the inner coating. Disassemble the metal
buffer beam and permanently remove the supports of the buffer beam.
2) Place the tow bar with the points (A) against the back of the vehicle on the provided screw-thread drillings
where the metal buffer was fixed. Insert the bolts and the security washers and tighten everything firmly
(according to tension). Assemble the metal buffer beam on the points (B) of the tow bar.
3) Make an incision in the bottom of the plastic locking piece as on (drawing 1) and re-assemble the piece on
The vehicle.
4) Assemble the pedestal of the detachable system T30, together with the supporting piece of the socket plate
Insert the bolts and tighten everything firmly.
5) Assemble afterwards the socket plate(-p) P39 (see further) according to fitting instructions enclosed.
6) Assemble the bumper on the vehicle.
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
+ Cabrio
(type E63)
2005 - ...
(type E64)
Publicité
