Nice TTD0110 Instructions Et Avertissements Pour L'installation Et L'utilisation page 10

ON
CONNECT POWER
LAMP ON
LAMP OFF
DESIRED VALUE
FOR THE BRIGHTNESS OF THE LAMP
PRESS BRIEFLY
1
PRESS AND HOLD THE BUTTON
ON THE TRANSMITTER
2
PRESS AND HOLD THE BUTTONS ON THE
TRANSMITTER AT THE SAME TIME
3
RELEASE THE BUTTON (OR THE BUT-
TONS) ON THE TRANSMITTER
4
1
- - -
TRANSMITTER BUTTONS
...
1 TRANSMITTER BUTTONS
- - 2
BRIEFLY PRESS THE DESIRED BUTTON
2
3
ON THE TRANSMITTER
PRESS AND HOLD THE DESIRED BUT-
TON ON THE TRANSMITTER
3
4
VIEW / SELECT
WAIT FOR...
4
WAIT FOR A PRECISE TIME
2 seconds
6 – English
All manuals and user guides at all-guides.com
4.3 - Transmitter recognition procedure
4.3.1 - Using the "First Transmitter" (Empty Memory)
This procedure allows you to associate a transmitter to the dimmer in
"Mode 1".
01.
02.
03.
BRIEFLY PRESS THE EXTERNAL BUTTON
PRESS AND HOLD THE EXTERNAL BUT-
TON
RELEASE THE EXTERNAL BUTTON
OFF
2 seconds
within 5
for 8 seconds
seconds
2
green LED: memorising OK
2
red LED: memorising NOT CONCLUDED
in this case, repeat the procedure from the beginning
ON
2
Green LED