Publicité
Les langues disponibles
Les langues disponibles
5
DISPLAY (T/F) BUTTON
IGNITION-OFF CLOCK CALL
During radio operation, a momentary press of the button will
change the display from frequency to clock time. Press again
and the radio display will change back to frequency.
During CD operation, a momentary press of the button will change
the display from track elapsed time to clock time.
IGNITION-OFF CLOCK CALL: To check the time with the vehicle
ignition switch in the "off" position, momentarily press the T/F
button. The display will illuminate and show the time and then
automatically shut off after 5 seconds.
6
BASS CONTROL
To adjust the bass level, first select the Bass mode by pressing
4
the Select button
so that the level number above the BASS
indication is flashing. Within 5 seconds of choosing the Bass
mode, press either the
/
or the
3
control
to adjust the bass response as desired. The bass
level will be shown on the display panel from a minimum of –7 to
a maximum of 7 (0 is flat response). The display will automatically
return to the normal indication 5 seconds after the last adjustment
or when another function is activated.
7
TREBLE CONTROL
To adjust the treble level, first select the Treble mode by pressing
4
the Select button
so that the level number above the TRE
indication is flashing. Within 5 seconds of choosing the Treble
mode, press either the
/
or the
3
control
to adjust the treble response as desired. The treble
level will be shown on the display panel from a minimum of –7 to
All manuals and user guides at all-guides.com
/
buttons of the Level
/
buttons of the Level
-2-
a maximum of 7 (0 is flat response). The display will automatically
return to the normal indication 5 seconds after the last adjustment
or when another function is activated.
8
LEFT/RIGHT BALANCE & FRONT/REAR FADER CONTROL
To adjust the left-right speaker balance and front-rear fader, first
select the Balance/Fader mode by pressing the Select button
so that the
R
0
F
0 indication appears on the display panel. Within
L
R
5 seconds of choosing the Balance/Fader mode, press the
3
button of the Level Control
the left channel speakers or the
channel speakers. When the volume level between the right and
R
left channels is equal,
0 will be shown on the display panel.
L
Adjusting the balance toward the right will increase the number on
the right side of the display to a maximum of
ing the balance toward the left will increase the number on the
left side of the display to a maximum of
will automatically return to the normal indication 5 seconds after the
last balance adjustment or when another function is activated.
Press the
or the
buttons of the Level Control
front-rear speaker levels as desired. When the level of the front
and rear speakers is equal,
F
0 will be shown on the display panel.
R
Adjusting the fader toward the front speakers will increase the
number on the left side of the display to a maximum of
front). Adjusting the fader toward the rear speakers will increase
the number on the right side of the display to a maximum of
rear). The display will automatically return to the normal indi-
cation 5 seconds after the last fader adjustment or when another
function is activated.
4
to adjust the stereo balance to
button to adjust it to the right
R
9 (full right). Adjust-
9 (full left). The display
L
3
to adjust the
F
9 (full
9 (full
R
Publicité
