Pioneer VSX-819H-K Mode D'emploi page 52

10 Controlling the rest of your system
Chapter 10:
Controlling the rest of your
system
Setting the remote to control
other components
Most components can be assigned to one of
the MULTI CONTROL buttons using the
component's manufacturer preset code stored
in the remote.
However, please note that there are cases
where only certain functions may be
controllable after assigning the proper preset
code, or the codes for the manufacturer in the
remote control will not work for the model that
1
you are using.
Note
• You can cancel or exit any of the steps by
pressing RECEIVER.
• After one minute of inactivity, the remote
automatically exits the operation.
Selecting preset codes directly
ZONE 2
RECEIVER
ON/OFF TV CONTROL
INPUT
BD BD TV TV DVR DVR
CD CD-R TUNER
VIDEO VIDEO MULTI IN AUX
VOL
Note
1 TV codes (for example, codes for TV, CATV, Satellite TV or DTV) can only be assigned to the TV button.
52
En
All manuals and user guides at all-guides.com
HDD DVD VCR
DISPLAY
1 1 2 2 3 3
S.RETRIEVER EQ CH SELECT SLEEP
4 4 5 5 6 6 CH
CH
MIDNIGHT
SB CH PHASE
7 7 8 8 9 9
CH
SHIFT
SPEAKERS
0 0
+ + ENTER
10 10
1 While pressing the RECEIVER button,
press and hold the '1' button for three
seconds.
2 Press the MULTI CONTROL button for the
component you want to control.
The component can be assigned to the BD, TV,
DVR or VIDEO button.
3 Use the number buttons to enter the
preset code.
You can find the preset codes on page 56.
If the correct code has been input the power of
the component being input will turn on or off.
The power of the component being input will
only turn on or off if that component is able to
be turned on directly by remote control.
4 Repeat steps 2 through 3 to try a different
code, or to enter a code for another
component you want to control.
5 When you're done, press RECEIVER.
Clearing all the remote control
settings
You can clear all presets and restore the factory
default settings.
• While pressing the RECEIVER button,
press and hold the '0' button for three
seconds.