Publicité
Les langues disponibles
Les langues disponibles
A1.5 Bravo, MiniBravo, BravoCALOR operation
Bravo: The raw water entering the filter flows from the inside to the outside of the cartridge. The high speed
discharge system is manually activated opening the bottom valve. That easy operation allows the removal of
the impurities suspended in water and moreover an effective cleaning of the filtering cartridge. This operation
is easy and quick requiring the opening of the bottom valve for a time sufficient to completely remove dirt from
the bowl. Bravo is easy to dismantle to facilitate cleanliness and maintenance. Bravo's head is made in brass
resistant to the systems typical stresses able to lead to the breakage of plastic heads.
The bowl is made in high-tenacity polyamide (maximum pressure 10 bar). The cartridge is made in stainless
steel and it is clamped on a plastic bushing with o ring sealing. The particular structure of the filtering
cartridge makes it resistant to pressure shock eliminating problems of deformation and crushing.
Bravo is equipped with a plastic key to open the bowl and an hand brush to facilitate cleanliness operations.
MiniBravo: small and compact self-cleaning filter equipped with bidirectional connection, top opening to pull
out and clean the filtering cartridge, cartridge back washing system, date indicator and calendar. The
bidirectional connection, when the installation is complete, allows to set the entrance of the water according to
the needs by means of the arrow-shaped knob. The raw water entering MiniBravo flows from the inside to the
outside of the cartridge. The high speed discharge system is manually activated opening the bottom valve.
That easy operation allows the removal of the impurities suspended in water and moreover an effective
cleaning of the filtering cartridge. This operation is easy and quick requiring the opening of the bottom valve
for a time sufficient to completely remove dirt from the bowl. MiniBravo is easy to dismantle to facilitate
cleanliness and maintenance MiniBravo's head is made in brass resistant to the systems typical stresses able
to lead to the breakage of plastic heads The bowl is made in high-tenacity polyamide (maximum pressure 12
bar). The cartridge is made in stainless steel and it is clamped on a plastic bushing with o ring sealing. The
particular structure of the filtering cartridge makes it resistant to pressure shock eliminating problems of
deformation and crushing. MiniBravo is equipped with an hand brush to facilitate cleanliness operations.
BravoCALOR: cleaning filter particularly suitable for the filtration of hot water (up to 90°C) with a body
completely made in brass and filtering cartridge in stainless steel with 89 micron filtration rating (models
FT220, FT222, FT224, FT230, FT232, FT234) for civil use and 500 micron (models FT 200, FT202, FT204,
FT210, FT212, FT214) for technological use. BravoCalor is equipped with a convenient plastic valve for the
discharge of the dirt from the bottom of the filter through the opening of the ferrule. BravoCalor is available
with pressure gauge 0-25 bar main pressure reading (models FT200, FT202, FT204, FT220, FT222, FT224).
BravoCALOR is a small sized filter able to process important flow rates with low headloss.
A1.6 Bravo, MiniBravo, BravoCALOR performances and technical datasheet
Bravo
Connections
Pressure gauge 0-12 bar
Flow rate (P=0,2 bar)
Flow rate (P=0,5 bar)
Filtration rating
Water pressure min.-max
Water temperature, min.-max
MAN036
All manuals and user guides at all-guides.com
BRAVO – MINIBRAVO - BRAVOCALOR - ENGLISH
Units
FT300
DN
½"F
-
no
3
m
/h
2.5
3
m
/h
4.2
micron
bar
°C
FT310
FT302
FT312
½"F
¾"F
¾"F
sì
no
sì
2.5
4.2
4.2
4.2
6.6
6.6
89
1.5 - 12
5 - 30
FT304
FT314
1"F
1"F
no
sì
5.1
5.1
8.7
8.7
PAG. E-4
Publicité
