DragonTouch Vision 4 Mode D'emploi page 7

5. Slow Motion: Off, 1080P/60FPS, 720P/120FPS
Default setting is off.
Slow motion is an effect in film-making whereby time appears to be slowed down.
Note: If you use Slow Motion function, EIS will be turned off automatically.
Slow motion video is captured without audio.
6. Audio Record: On / Off
Default setting is on.
Turn off Audio Record, the camera does not record audio when you record video.
PHOTO SETTING
1. Photo Resolution: 16M / 14M / 12M / 8M / 5M
Default setting is 16M.
2. Time Lapse Photo: Off / 2 Sec. / 10 Sec.
Default setting is off.
Time Lapse Photo captures a series of photos at specified intervals. Use this mode to capture
photos of any activity, then choose the best ones later.
3. Burst Photo: Off / 3 Photos / 5 Photos
Default setting is off.
Burst captures up to 5 photos in 1 second, so it is perfect for capturing fast-moving activities.
GENERAL SETTING
1. Volume: 0-10
Default setting is 5.
Press Up button to turn up the volume.
Press Down button to turn down the volume.
2. Beep: On / Off
Default setting is on.
Sets the volume of your Vision 4's alerts.
09
All manuals and user guides at all-guides.com
3. Exposure: 2 / 1.7 / 1.3 / 1 / 0.7 / 0.3 / 0 / -0.3 / -0.7 / --1 / -1.3 / -1.7
Default setting is 0.
By default, your camera uses the entire image to determine the appropriate exposure level.
However, Exposure lets you select an area that you want the camera to prioritize when
determining exposure. This setting is particularly useful in shots where an important region
might otherwise be over- or underexposed.
When you change this setting, the LCD display immediately shows you the effect on your
image. If you change modes, the camera returns to using the entire scene to determine the
correct level of exposure.
4. White Balance: Auto / Daylight / Cloudy / Fluorescent / Incandescent
Default setting is auto.
White Balance lets you adjust the color temperature of videos and photos to optimize for
cool or warm lighting conditions. When you change this setting, the LCD display immediately
shows you the effect on your image.
5. ISO: Auto / 100 / 200 / 400 / 800 / 1600 / 3200
ISO determines the camera's sensitivity to light, and creates a trade-off between brightness
and resulting image noise. Image noise refers to the degree of graininess in the image.
In low light, higher ISO values result in brighter images, but with greater image noise. Lower
values result in lower image noise, but darker images. When you change this setting, the LCD
display immediately shows you the effect on your image.
6. Effect: Normal / Sepia / B&W / Negative
Default setting is normal.
7. Contrast: -100---+100
Default setting is 0.
8. Saturation: -100---+100
Default setting is 0.
10