DragonTouch Vision 4 Mode D'emploi page 4

GETTING STARTED
Welcome to your new Vision 4. To capture video and photos, you need a micro SD card
(sold separately).
MICRO SD CARDS
Use brand name memory cards that meet these requirements:
• micro SD, micro SDHC, or micro SDXC
• Class 10 or UHS-I rating
• Capacity up to 64GB (FAT32)
Note: Please format the micro SD card first in this camera before using. To keep your micro
SD card in good condition, reformat it on a regular basis. Reformatting erases all of
your content, so be sure to offload your photos and videos first.
POWERING ON + OFF
To Power On:
Press and hold the Mode button for three seconds. The camera beeps while the camera
status light is on. When information appears on the LCD display or the camera status screen,
your camera is on.
To Power Off:
Press and hold the Mode button for three seconds. The camera beeps while the camera
status light is off.
SWITCHING MODE
To Switch Mode:
Press the Mode button to switch the mode.
EXITING MODE
To Exit Mode:
Press the Mode button to exit mode.
03
All manuals and user guides at all-guides.com
OVERVIEW OF MODES
There are 8 modes: Video, Photo, Video Playback, Photo Playback, Video Setting,
Photo Setting, General Setting and System Setting.
VIDEO MODE
Video Mode is the default mode when you turn on the camera.
In Video Mode, press Shutter button, the camera starts recording video. Press Shutter
button to stop recording video.
4K/30FPS
08/20/2018 09:20:15
PHOTO MODE
Press Mode button once to switch to Photo Mode after you turn on camera. In Photo Mode,
press Shutter button, the camera takes a photo.
16M
08/20/2018 09:25:21
TF
00:05:10
TF
04