DragonTouch Vision 4 Mode D'emploi page 6

GENERAL SETTING MODE
Press Mode button several times to switch to General Setting Mode.
General Setting
1/3
Exposure
SYSTEM SETTING MODE
Press Mode button several times to switch to System Setting Mode.
System Setting
1/4
07
All manuals and user guides at all-guides.com
Volume 5
Beep On
0
Language English
Car Mode Off
Power Off
3 Min.
CUSTOMIZING YOUR VISION 4
VIDEO SETTING
1. Video Resolution: 4K/30FPS, EIS 4K/30FPS, 2.7K/30FPS, 1080P/60FPS, 1080P/30FPS,
720P/120FPS
Default setting is 4K/30FPS.
Note: When capturing video at high resolutions or high frame rates in warm ambient
temperatures, the camera may become warm and use more power.
2. EIS: On / Off
Default setting is off.
This setting adjusts the footage to offset for motion during capture. The result is smoother
footage, especially in activities with relatively small but fast motion including cycling,
motorcycling, and handheld uses.
Note: 1). If you turn on EIS, then select 4K/30FPS, EIS will be turned off automatically.
2). If you select 4K/30FPS, then turn on EIS, the video resolution will be EIS 4K/30FPS
automatically.
3. Loop Recording: Off / 1 Min. / 3 Min. / 5 Min.
Default setting is off.
Using Loop Recording, you can continuously record video, but save only the moments that
you want. For example, if you select a 5-minute interval, only the previous 5 minutes are
saved when you press the Shutter button to stop recording. If you record for 5 minutes and
do not press the Shutter button to stop recording and save, the camera records a new
5-minute interval by recording over your previous 5 minutes of footage. When the micro SD
card is full, the new files will cover the old one if loop recording is on.
4. Time Lapse Video: Off / 1 Sec. / 5 Sec. / 10 Sec. / 30 Sec. / 60 Sec.
Default setting is off.
Time Lapse Video creates video from frames captured at specific intervals. This option lets
you capture a time lapse event and immediately view or share it as a video. Time Lapse
Video is captured without audio.
08