Robstep X1 Manuel D'instructions page 55

All manuals and user guides at all-guides.com
3. Connect handlebar's power wire with the
power wire inside the telescopic rod.
4. Insert the handlebar into the upper
telescopic rod, and tighten six screws,
and then buckle up the clamp.
5. Install saddle, and tighten four screws.
6. Install pedals, and tighten four screws,
and then unfold the pedals.
7. Unfold the bicycle body.
8. Buckle up the folding button to fi x front
and rear parts.
GB
55