Robstep X1 Manuel D'instructions page 50

2.3.5 Lithium battery
This section mainly introduces the specifi cation, correct charging method, maintenance
method, safety notes etc. of the battery of Robstep X1.
2.3.5.1 Specifi cations of battery
Type
Charging time
Voltage
Weight
Initial capacity
Working temperature
Charging temperature
Relative humidity of storage
Noise
2.3.5.2 Capacity Depletion of Battery
If battery percentage doesn't show up on the
display panel, it means the battery capacity
is extremely low, user must stop driving. In
this case, if user does not stop driving, the
lifespan of the battery would be shortened
signifi cantly.
WARNING!
User should pay attention to the prompt
on the display panel and operate
correspondingly for safety when driving.
50
All manuals and user guides at all-guides.com
High confi guration/low confi guration lithium battery
3 hours
48 V
1,7 kg (only for reference, be subject to actual weight)
4400 mAh
-20 - +60 °C (recommend 0-45 °C)
0 - +45 °C (recommend 10-30 °C)
80 ±25% R.H.
< 70 dB(A)
2.3.5.3 Battery Charging Steps
Insert one end of charging cable into the
charging port on Robstep X1 (make sure the
charging port is dry), and then insert the
plug of the charger into the power socket.
When the indicator of the charger turns to
green from red, it means the battery is fully
charged.
The battery can be charged directly when
locked at Robstep X1. And the battery can be
Charging port,
battery lock