Robstep X1 Manuel D'instructions page 54

3. Operation of Robstep X1 and
safety notice
3.1 Operation description
Please read this manual carefully before
using.
• Please assemble Robstep X1 correctly
and fully charge the battery before use.
• Before driving, user should fully gen up
the driving environment.
• Please do not war sharp objects to avoid
injury during driving.
• Please do not drive on wet and slippery
ground.
Step 1: Take Robstep X1 frame and
parts out of the package.
54
All manuals and user guides at all-guides.com
Step 2: Robstep X1 electric bicycle
assembly
1. Let the power wire located at lower
telescopic rod go through the upper
telescopic rod.
Power wire
Upper telescopic rod
Metal marble
Lower telescopic rod
2. Press the metal marble and make it be
in alignment with the groove inside the
lower telescopic rod, and then insert
the upper telescopic rod into the lower
telescopic rod.