Télécharger Imprimer la page

emerio FN-114501.8 Mode D'emploi page 6

Ventilateur sur pied

Publicité

Les langues disponibles
  • FR

Les langues disponibles

OPERATING INSTRUCTIONS
1.
Plug the power cord into a suitable socket.
2.
Oscillation: To make the fan head oscillate, push down the oscillation knob. To stop the fan head from
oscillating, pull up the oscillation knob.
3.
Tilting Angle: The fan head can lean slightly backwards in a tilt angle from 0° to 10° (See below drawings for
reference.). Just loosen anticlockwise the knob for adjusting tilt of fan head (3) and the screw for fixing tilt
of fan head (4), push the fan guard and make the fan head lean back to your desired angle within the tilt
range, then tighten clockwise the knob for adjusting tilt of fan head (3) and the screw for fixing tilt of fan
head (4).
Tilting angle – 0°
4.
The fan is switched on by turning the speed control switch, i.e. O = OFF, I = low Speed, II = medium Speed,
III =high speed.
CLEANING
1.
Before servicing the fan and after each occasion of use, switch off the appliance and unplug the mains
cable from the socket.
2.
Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe it down
with a damp cloth and dry it carefully. Always take out the mains plug first.
3.
Take care that excessive dust does not build up in the air-intake and air-outlet grille, and clean it
occasionally using a dry brush or vacuum cleaner.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50/60Hz
Power consumption: 50W
GUARANTEE AND CUSTOMER SERVICE
Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred
during production or transportation, please return the device to your dealer. In addition to statutory legal rights,
the purchaser has an option to claim under the terms of the following guarantee:
For the purchased device we provide 2 years guarantee, commencing from the day of sale. If you have a
defective product, you can directly go back to the point of purchase.
Defects which arise due to improper handling of the device and malfunctions due to interventions and repairs
by third parties or the fitting of non-original parts are not covered by this guarantee. Always keep your receipt,
without the receipt you can't claim any form of warranty. Damage caused by not following the instruction
Tilting angle – 10°
- 5 -

Publicité

loading