Automatic Operation - HomeMatic IP Starter Set easy connect Notice De Montage Et D'emploi

0
Configuration menu of the radiator thermostat
0 6
Mo Tu We Th Fr Sa Su
0
0
Mo Tu We Th Fr Sa Su
AUTO
Mo Tu We Th Fr Sa Su
Mo Tu We Th Fr Sa Su
AUTO
BOOST
6.1
AUTO
AUTO
BOOST
MANU
BOOST
MANU BOOST
6.2
MANU
MANU
0 6 12
18
6
0 12 18
6.7
Mo Tu We Th Fr Sa Su
Offset
Mo Tu We Th Fr Sa Su
Offset
AUTO
AUTO Prg
6
12 18 24
6.5
Offset
Prg
BOOST
Offset
BOOST
AUTO
MANU
Prg
MANU
Prg
6.4
BOOST
MANU
6.6
Offset
Offset
Prg
6.3
Prg
Prg
If you connect the device to the Access Point, you can
comfortably adjust the settings via the Homematic IP app.
If you have already adjusted the settings in the configuration
menu or if you have already connected the device to another
Homematic IP device, you first have to restore the factory
settings of the device before you can connect it to a
Homematic IP Access Point or another Central Control Unit
CCU2/CCU3 (see „10 Restore factory settings" on page 57).
6.1

Automatic operation

In automatic mode, the temperature is controlled in accordance with
the set heating profile. Manual changes are activated until the next
point at which the profile changes. Afterwards, the defined heating
profile will be activated again. To activate the automatic mode, please
proceed as follows:
Select "Auto" via the plus and minus buttons (E and F) in the menu.
•
• Confirm with the menu button.
To confirm, the symbol flashes twice and the device changes back to
automatic mode.
48
6 12
18 24
12 18 24
6
12 18 24
6 12
18 24
Automatic mode
Manual operation
24
24
Offset temperature
Programming a heating profile
Operating lock
Date and time
Holiday mode