Error Codes And Flashing Sequences - HomeMatic IP Starter Set easy connect Notice De Montage Et D'emploi

Table des Matières

Les langues disponibles

sion time of any device is 1% of an hour (i.e. 36 seconds in an hour).

Devices must cease transmission when they reach the 1% limit until

this time restriction comes to an end. Homematic IP devices are de-

signed and produced with 100 % conformity to this regulation. Dur-

ing normal operation, the duty cycle is not usually reached. However,

repeated and radio-intensive teach-in processes mean that it may be

reached in isolated instances during start-up or initial installation of

a system. If the duty cycle is exceeded, this is indicated by one long

red lighting of the device LED (D or L) , and may manifest itself in

the device temporarily working incorrectly. The device starts working

correctly again after a short period (max. 1 hour).

9.3