Belkin Bitronics AutoSwitch F1U128-KIT Guide De L'utilisateur page 8

Device activity LEDs
Connector to Device A
Connector
to PC1
DIP switch settings (located underneath switch):
SW1: Reset Switch
To reset, OFF¡ON¡OFF
SW2 and SW3: TimeOut Setting
TimeOut is the amount of time the switch remains locked on a PC port after
data transfer. Use a longer TimeOut when connecting to scanners, mass
storage devices and for large print jobs.
SW2
ON
ON
OFF
OFF
Product Detail
Connector to PC2
PC activity LEDs
ON is UP. SW4 is not used.
SW3
ON
OFF 10 seconds
ON
OFF
Connector to Device B
Connector to PC3
TimeOut
5 seconds
20 seconds
40 seconds
3
Connector
to PC4
DC power jack
(side)
Computer button
Printer button
ON DIP
1 2 3 4
Recommended
En