1. Manuels
  2. Marques
  3. Belkin Manuels
  4. Commutateurs
  5. Bitronics AutoSwitch F1U128-KIT
  6. Guide de l'utilisateur

Belkin Bitronics AutoSwitch F1U128-KIT Guide De L'utilisateur page 37

Masquer les pouces
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Sony
Models PCV-70/90/100/120:
1.
Restart your computer.
2.
During the first black and white Sony screen, press F3 to enter the boot screen.
3.
Press F1 to enter the BIOS Setup.
4.
Use right arrow to reach the Advanced menu.
5.
Scroll down and highlight Peripheral Configuration and press ENTER.
6.
Scroll down and highlight Parallel Port Type. The default setting is Compatible.
Press ENTER.
7.
Select ECP and press ENTER.
8.
Press ESC twice to get to the Exit screen.
9.
Press ENTER twice to Exit Saving Changes. The system will restart into Windows
Models PCV-130/150:
1.
Restart your computer.
2.
During the first black and white Sony screen, press F3 to enter the boot screen.
3.
Press F1 to enter the BIOS Setup.
4.
Use right arrow to reach the Advanced menu.
5.
Scroll down and highlight Peripheral Configuration and press ENTER.
6.
Scroll down and highlight Mode. The default setting is ECP. Press ENTER.
7.
Select ECP. Press ENTER.
8.
Scroll to Parallel Port and press ENTER.
9.
Select Enabled and press ENTER.
10. Press ESC twice to get to the Exit screen.
11. Press ENTER twice to Exit Saving Changes. The system will restart into Windows
Models PCV-200/210/220/230/240:
1.
Restart your computer.
2.
During the first black and white Sony screen, press F3 to enter the boot screen.
3.
Press F1 to enter the BIOS Setup.
4.
Use right arrow to reach the Advanced menu.
5.
Scroll down and highlight Peripheral Configuration and press ENTER.
6.
Scroll down and highlight Mode. The default setting is ECP. Press ENTER.
7.
Select either ECP. Press ENTER.
8.
Scroll to Parallel Port and press ENTER.
9.
Select Enabled and press ENTER.
10. Press F10 to save these changes, confirm and exit. The system will restart
into Windows
Sony PCG-705/707/717/719 Notebooks:
1.
In Windows
®
2.
Select Sony Folder.
3.
Select Sony Utilities.
4.
Select Sony Notebook Setup.
5.
Select the Printer/FDD tab.
6.
Make sure Use as printer connector is selected and choose the desired port
mode required by the printer. There are three options available on this screen:
Appendix
®
.
95, open the Start Menu.
(continued)
32
.
®
®
.

Publicité

Table des Matières
loading

Manuels Connexes pour Belkin Bitronics AutoSwitch F1U128-KIT

Produits Connexes pour Belkin Bitronics AutoSwitch F1U128-KIT

Ce manuel est également adapté pour:

Bitronics f1u128-kitP73046

Table des Matières