Belkin Bitronics AutoSwitch F1U128-KIT Guide De L'utilisateur page 22

Windows
8.3. Click on the Details tab. In the pull-down menu Print to the
following port:, select the correct port this printer is connected to
on the Bitronics switch:
• LPx1 – PA (autoswitch) – Select this if the printer is connected to
Port A of the Bitronics switch.
• LPx1 – PB (autoswitch) – Select this if the printer is connected to
Port B of the Bitronics switch.
In the image above, the printer is connected to Port B of the
Bitronics switch. Therefore, LPx1 – PB (autoswitch) is selected.
When finished, click OK.
8.4. Click on Spool Settings and click on Start printing after last page
is spooled.
95 / 98 and NT
®
17
®
(continued)
En